
ruTorrent is known for the vast functionalities it يوفر. With many features, يوجد a higher probability that ستظهر لك run into some errors. These errors are small and their fixes are even smaller.In this article, we will address all the common ruTorrent errors and how يمكنك fix them.
خطأ: Bad data from the tracker or Bad Tracker Data
الحل:
It occurs when the tracker is overloaded. The ideal solution is to be patient and wait for the torrent to stabilize. If it error remains after some time too, then you might want to consider changing the torrent file.
خطأ:
Problem connecting to tracker – timeout exceeded
Problem connecting to tracker – HTTP خطأ 503: Connect failed
Problem connecting to tracker – [Errno socket error] (10061, “Connection refused”
Problem connecting to tracker – (111, ‘Connection refused’
الحل:
This again needs patients من end. When trackers are facing heavy traffic, some connection issues may take place. In such cases, just keep your ruTorrent running, the error will be resolved once the connection is back.
خطأ: Problem connecting to tracker – HTTP خطأ 404: Not Found
الحل:
The torrent file is no longer متاح.
خطأ: Problem connecting to tracker – HTTP خطأ 400: Not Authorized
الحل:
The torrent file is very old and has been removed.
خطأ: Problem connecting to tracker – HTTP خطأ 407: Proxy Authentication Required
الحل:
Check and very your login بيانات الاعتماد of the server to re-establish connection with the tracker.
خطأ: *(IOخطأ – [Errno13] Permission denied)
الحل:
ruTorrent is running and another ruTorrent instance is opened. هذا هو not allowed by the trackers. لذلك restart your ruTorrent.
خطأ: Connecting to peers
الحل:
There might not be any peers متاح at the moment. Leave the ruTorrent on and the error will be gone when peers are found.
خطأ: Problem connecting with tracker – (10054,’Connection reset by peer’)
الحل:
The connection has been shut down by the remote computer. It cannot be resolved.
خطأ: PHP module PCRE is not installed. ruTorrent will not work.
الحل:
A PHP module is missing, Please raise a ticket and mention the error.
خطأ: Rejected by tracker – Port XXXX is blacklisted
الحل:
One of the default ports is being يستخدم لـ establish the connection. The tracker won’t allow such a connection with a client as these are the common ports that are throttled by the ISP. You should contact the tracker and request the ports that are ideal.
خطأ: Web server can’t access rTorrent’s session directory for reading. ruTorrent will not work.
الحل:
هذا هو usually caused by settings of permissions. Contact support in case of such an issue.
خطأ:
rTorrent’s user can’t access settings directory for read/write/execute. ruTorrent will not work.
rTorrent’s user can’t access file ./test.sh for read/execute. ruTorrent will not work.
rTorrent’s user can’t access torrents directory for read/execute. يمكنك’t add torrents through ruTorrent.
Web server can’t access settings directory for read/write/execute. ruTorrent can’t save own settings.
Web server can’t access torrents directory for read/write/execute. يمكنك’t add torrents through ruTorrent.
الحل:
These errors point out that the installation of ruTorrent is not done correctly. Please contact support in case of such issues.
خطأ: Bad link to rTorrent. Check if it is really running. Check $scgi_port and $scgi_host settings in config.php and scgi_port in rTorrent configuration file.
الحل:
This means that the ruTorrent instance is terminated or did not start. إذا are able to see the list of torrents with this error then يوجد an issue with the ruTorrent configuration file.
خطأ: *rTorrent is compiled with incorrect version of xmlrpc-c library, without i8 support. Version must be >= 1.11. Some functionality will be unمتاح.
الحل:
Old forms of xmlrpc-c don’t uphold long integers. So numbers more noteworthy than 2G will be appeared as negative. Furthermore, the exchange window @Settings@ won’t work as expected. Note – it isn’t sufficient to have quite recently the library xmlrpc-c variant >=1.11 in the framework. It is important to have rTorrent assembled with it.
خطأ: plugin: rTorrent’s user can’t access PHP interpreter. Plug-in will not work.
الحل:
This error is identified with PHP running on the framework. Note – if PHP is working in the framework, it doesn’t generally imply that the interpreter exists in the framework as well. The bundle php-cli is important. Web-worker may utilize e. g. php-fcgi which doesn’t contain an interpreter. Again in the event that you are inexperienced with this, if it’s not too much trouble, contact us by opening a help ticket so we settle this for you.
خطأ: xxx plugin: Plugin will not work. Web-server can’t access to external program (program name)
الحل:
Some plugins are missing to work properly. Contact support and we will resolve the issue for you.These are the top and most common errors, if you have found anything apart from this, please contact support team for assistance.